DC MCB

The Micron DC MCBs is a protective device equipped with thermal & electromagnetic release for overload & short circuit protection.Devices are designed for direct current (DC) applications like E-Rickshaw, Solar PV, Electric Vehicles, Charging Stations, Battery Storage and UPS Systems.

Technical Information:

• Standard conformity : IS 60898:2/ IEC 60947-2, ROHS
• Rated Current (In) : 6, 10, 16, 20, 25, 32, 40 & 63 AMP
• Rated Breaking Capacity (ICU) : 10KA / 6KA
• Rated Voltage (Un) : 24V, 48V, 96V, 120V, 240V DC
• No. of Poles : SP, DP, TP & FP
• Rated Insulation Voltage (Ui) : 660 V
• Rated Impulse Voltage (Uimp) : 4 kV
• Energy Limiting Class : Class 3
• Ambient Temperature (˚C) : -5˚ to 55˚
• Degree of Protection : IP20
• Trip Type : Thermal and Magnetic
• Installation Category : Class III
• Mounting : Snap on DIN rail at (35mm x 7.5mm)

Features: 

• CE marking fulfils the requirement of Global Standard.
• Applicate in direct current Specially designed for E-Rickshaw for the safety of battery, controller, motor, auxiliary circuit and photovoltaic from dangerous High DC Current
• Environment friendly, meets the ROHS compliance as defined by the European Standard. Shock Proof: Finger and Hand touch safe.
• Housing & Cover made from Flame Retardant Material ensures protection against heating and strong impact.
• The contacts are made of high grade material silver inlay copper
• A quick make & Break trip free mechanism.
• Suitable for Isolation.

The Micron DC MCBs is a protective device equipped with thermal & electromagnetic release for circuit protection against overload & short-circuit current in DC distribution system equipment and electric equipment. Devices are designed for direct current (DC) applications mainly Solar PV & others like Electric Vehicles, Charging Stations, Battery Storage and UPS Systems.

Technical Information:

• Standard conformity : IS/IEC 60898:2/ 60947:2
• Rated Current (In) : 6, 10, 16, 20, 25, 32, 40 & 63 AMP
• Rated Breaking Capacity (ICU) : 6000A (6 kA)
• Rated Voltage (Un) : 1P: 250V, 2P: 500V & 4P: 1000V
• No of Poles : 1, 2 & 4
• Rated Insulation Voltage (Ui) : 500 V
• Rated Impulse Voltage (Uimp) : 4 kV
• Energy Limiting Class : Class 3
• Ambient Temperature (˚C) : -5˚ to 55˚
• Degree of Protection : IP20
• Trip Type : Thermal and Magnetic 
• Installation Category : Class III 
• Mounting : Snap on Din rail at (35mm x 7.5mm)
• Connecting Terminals : Box Type/35mm²
• ON-OFF Indication : Positive Indication as ON (RED) & OFF (GREEN)
• Connections : Dual Connection Level (Bus Bar + Cable)

Features: 

• CE marking fulfils the requirement of Global Standard.
• Protection the PV Module from dangerous high DC back current.
• Applicate in direct current circuit like Motor, auxiliary circuit and photovoltaic.
• Environment friendly, meets the ROHS compliance as defined by the European Standard. Shock Proof: Finger and Hand touch safe.
• Housing & Cover made from Flame Retardant Material ensures protection against heating and strong impact.
• Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving.
• A quick make & Break trip free mechanism.
• Positive Isolation.
• Suitable for Commercial, Industrial , Residential & New Energy.
• Install before invertor to protect Solar Panel in case of high surge current.